Bin Activator

A Bin Activator consists of a spun steel dish onto which a discharge come has been bolted. Across the dish are a number of welded cross-members that support the internal baffle cone. A vibrator motor - two on some sizes - is bolted on the outside of the dish. The degree of vibration is adjustable by means of a pair of out-of balance weights situated at each end of the motor.

The whole assembly is suspended beneath the outlet of the silo on a number of suspension rods located in rubber isolation mounts, to ensure that vibration is not transmitted up the silo walls. These rods are attached to the hopper of the silo via a support ring which is a welded or in some cases bolted to the hopper.

A rubber sleeve secured by clamps, seals the gap between the support ring and the Bin Activator assembly.

Sizes range from 2 ft 0"(610mm) to 12 ft 0"(3.66 m) diameter.

To download our manual on this product in PDF format (1.13mb), please click below. You will need a copy of Adobe (Acrobat) Reader in order to view this file. This is a free download.

| Bin Activator | | Soliflo | | Screw Bin Discharger | | Ribbon Bin Agitators |